4英寸f_(max)=620 GHz的0.25μm InP DHBT北大核心

报道了一款在101.6 mm(4英寸)InP晶圆上制备的特征尺寸为0.25μm的磷化铟双异质结双极型晶体管。采用发射极自对准技术和介质钝化工艺,器件的发射极典型尺寸为0.25μm×3.00μm,最大电流增益为25,当发射极电流密度为10μA/μm^(2)时,器件的击穿电压达到了4.2 V,电流增益截止频率为390 GHz,最高振荡频率为620 GHz。建立了用于提取器件寄生参数的小信号等效电路模型,模型的仿真结果与高频实测数据具有很好的拟合精度。     

背栅偏置对掩埋氧化层辐射感生陷阱电荷调控规律及机理北大核心

研究了辐照过程中施加背栅偏置对掩埋氧化层(BOX)辐射感生陷阱电荷的调控规律及机理。测试了130 nm部分耗尽绝缘体上硅金属氧化物半导体场效应晶体管在不同背栅偏置条件下辐射损伤规律,试验结果显示辐照过程中施加正向背栅偏置可以显著增强辐射陷阱电荷产生,而施加负向背栅偏置并不能明显抑制氧化物陷阱电荷的产生,甚至在进一步提高负向偏置时会使氧化物陷阱电荷的数量上升。通过TCAD器件模拟仿真研究了背栅调控机理,研究结果表明:尽管负向背栅偏置可使辐射感生陷阱电荷远离沟道界面,但随着BOX层厚度减薄该区域电荷仍可导致器件电参数退化,且提高负向偏置电压可进一步增强陷阱电荷产生,加剧辐射损伤。     

Joint Power-Trajectory-Scheduling Optimization in A Mobile UAV-Enabled Network via Alternating Iteration

This work focuses on an unmanned aerial vehicle(UAV)-enabled mobile edge computing(MEC) system based on device-to-device(D2D) communication. In this system, the UAV exhibits caching,computing and relaying capabilities to periodically provide specific service to cellular users and D2D receiver nodes in the appointed time slot. Besides, the D2D transmitter can provide additional caching services to D2D receiver to reduce the pressure of the UAV. Note that communication between multi-type nodes is mutually restricted and different links share spectrum resources. To achieve an improved balance between different types of node, we aim to maximize the overall energy efficiency while satisfying the quality-of-service requirements of the cellular nodes.To address this problem, we propose an alternating iteration algorithm to jointly optimize the scheduling strategies of the user, transmitting power of the UAV and D2D-TX nodes, and UAV trajectory. The successive convex approximation, penalty function, and Dinkelbach method are employed to transform the original problem into a group of solvable subproblems and the convergence of the method is proved. Simulation results show that the proposed scheme performs better than other benchmark algorithms, particularly in terms of balancing the tradeoff between minimizing UAV energy consumption and maximizing throughput.     

基于移动窗口法的城市遥感生态质量评价研究

为进一步提高城市生态监测的精确度，在前人开展的城市生态遥感监测研究的基础上引入“区域尺度”的概念，充分考虑小区域范围内不同地物间的交互作用，并利用移动窗口模型(Moving Window-Remote Sensing Ecology Index, MW-RSEI)对沈阳市浑南区的遥感影像进行逐像元分析。实验结果表明，MW-RSEI模型和生态遥感监测模型（Remote Sensing Ecology Index, RSEI)在整体生态评价趋势上表现出一致性。但MW-RSEI模型对城市生态中的细节区域表征更明显。考虑到建筑及裸地周围植被的影响，其较差生态区域的占比仅为6%，生态评价为优的区域占比为11%。研究区生态评价结果表现得较为连续，并未出现明显的断层现象。该结果具有现实意义且与实际生态分布更为符合。MW-RSEI模型在城市生态监测中更为适用，可为相关部门提供一定的技术参考。     

动载作用下铁矿石能量耗散规律及破坏特征试验研究

为研究攀枝花铁矿开采境界内铁矿石的动力学性能,利用动静组合分离式霍普金森杆实验系统,开展 4 种典型铁矿石的动态单轴压缩试验。 以动态强度、能量耗散、碎屑分布为切入点,分析 4 种矿石的动力学响应特征。 试验结果表明:4 种铁矿石的动态强度均具有明显的率效应,随冲击速率的增加而增大;所研究冲击速率范围内,中低 品位铁矿石的动态强度显著大于高品位铁矿石和表外矿的强度;随着冲击速率的增加,单位体积耗散能随之增大,且 单位体积耗散能的增加幅度与铁矿石的品位相关;基于分形理论分析 4 种铁矿石破坏后碎屑块度的分形维数,发现碎 屑块度的分形维数随冲击速率增大而增加;最后,分析了单位体积耗散能与分形维数的关系,发现二者呈现非线性正 相关关系。